Mitsubishi Electric MELDAS C6 Instruction Manual page 181

Files are saved in the flash ATA card with the following formats.
Machining program
Tool data
Parameter
Common variable
Auxiliary axis parameter
History data
Maintenance data
System data
File data
PLC program
Individual data
(including No.150 to 199 and
No.251)
(Note 1)
(Note 2)
(Note 3)
(Note 4)
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Data type
(Note 1)
No.100 to 149
No.200 to 231
No. 250,
No.252 to 299
A parameter must be set to input and output fixed cycle programs.
The program No. in the memory is a number with eight or less digits.
When assigning the file name, the user can assign the name randomly with three or less
digits.
For independent data, if the data type No. is set to n, "n.MNT" will be the independent data
file name.
search engine
2.6 Data In/Out
File name
8 characters Alphabet and
or less number
(Note 2)
Alphabet and
number
Alphabet and
number
(Note 4) .MNT (automatically assigned)
I - 166
Extension
None (Note 3)
.OFS (automatically assigned)
.PRM (automatically assigned)
.VAR (automatically assigned)
.PRA (automatically assigned)
.TRC (automatically assigned)
.AL1 (automatically assigned)
.AL2 (automatically assigned)
.AL3 (automatically assigned)