Tool Life Management I ("#1096 T_L Type" Is 1) - Mitsubishi Electric MELDAS C6 Instruction Manual

(Refer to "2.3 (II). Tool Offset
(M system)" for M system.

2.3.4 Tool Life Management I ("#1096 T_L type" is 1)

The TOOL LIFE DATA screen will appear when the menu key
Tool life management is valid when parameter "#1103 T_Life" is set to 1. Tool life management is
then carried out according to the tool usage time or the No. of times the tool is used (also called
count). When the tool usage time reaches the service life time, or when the tool count exceeds the
service life count, a tool life expiration signal (X62E) is output to the user PLC and the tool No. (#) is
highlighted on the TOOL LIFE DATA screen.
Tool life management is possible for up to 80 tools (tool Nos. 1 to 80).
This function is useful for setting tool abrasion and wear data, and for knowing when to replace
tools with new ones, etc.
TIME
COUNT
STATUS
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
2.3 (I). Tool Offset (L system)
Item
USED The cumulative time the tool is used.
MAX The tool service lifetime setting.
USED The cumulative count the tool is used.
MAX The tool service life count.
Left The tool life management status is
side indicated.
Right
(Machine maker free area)
side
search engine
Details
This timer value is incremented during
cutting.
Set the max. time the tool can be used.
Seconds are discarded.
The counter value is incremented each
time the tool is used.
Set the max. count the tool can be
used.
0: Not used
1: Current tool (tool being used)
2: Service lifetime (service life count)
is
exceeded.
I - 64
LIFE
is pressed.
Setting range
0 : 0 to 99 : 59
(h: min)
0 : 0 to 99 : 59
(h: min)
(0 : 0 = no warning
given)
0 to 9999 (times)
0 to 9999 (times)
(0 : 0 = no warning
given)
0 to 2
0 to 99