Mitsubishi Electric MELDAS C6 Instruction Manual page 128

(3) MDI data setting
(1)
Enter MDI data by pressing the
data keys in sequence according
to the machining program listing.
N1
N2
N3
N4
N5
N6
N7
N8
(2)
Press the
1) The data is written into the MDI memory
2) It is displayed on every line per block.
3) The message MDI SETTING COMPLET
(Note 1) If the
(Note 2) See "2.5.3 Program Edit Operation" for details of key operation to set MDI data.
(Note 3) Check the MDI SETTING COMPLET message before starting MDI operation. If the
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
G28 X0 Y0 Z0 ;
G92 X0 Y0 Z0 ;
G00 X − 100. Y − 100. ;
G01 X − 300.
F2000;
Y − 300. ;
X − 100. ;
Y − 100. ;
M02 ;
INPUT
key.
area.
is displayed and MDI operation is enabled.
The running start position is the starting
block of data. The cursor is displayed in
the starting block.
CAUTION
Because of key chattering, etc., during editing, "NO NOS. FOLLOWING G" commands
become a "G00" operation during running.
INPUT
key is not pressed, data is simply displayed on the screen and is not
actually stored in memory. Be sure to press the
EDITING or MDI NO SETTING message is displayed, MDI operation cannot be started. If
INPUT
the key is pressed at the time, the MDI SETTING COMPLET message is
displayed.
search engine
2.5 Program
INPUT
I - 113
key.