Outputting Auxiliary Axis Parameter Data - Mitsubishi Electric MELDAS C6 Instruction Manual

2.6.2.6 Outputting Auxiliary Axis Parameter Data

Auxiliary axis parameter data can be output.
(1) Auxiliary axis parameter data output operation
Set the data type to the auxiliary
axis parameter.
# ( 2 8 ) DATA (
Press the
1) Data output starts and the contents of
2) When tape end code % (EOR) is output,
(Note) If MR-J2-CT is not connected, "E01 SETTING ERROR" will occur and output will not be
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
)
INPUT
key.
the output data and message "DATA
OUT EXECUTION" are displayed.
the data output completes with message
"DATA OUT COMPLETE" displayed.
carried out.
search engine
2.6 Data In/Out
28
28
I - 151