Mitsubishi Electric MELDAS C6 Instruction Manual page 282

Directory names
MACHINING
PROGRAM
TOOL OFFSET
DATA
PARAMETER
COMMON
VARIABLE
WORK OFFSET
DATA
MAINTENANCE
DATA
OPERATION
HISTORY
MR-J2-CT
PARAMETER
(Note 1) If the Base specifications parameter "#1166 fixpro" is set to "1", the fixed cycle programs
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.4 Data In/Out Screen (For only the panel computer)
All the directories and their contents in the NC are as follows.
Contents
Machining program
Machining program
(batch)
Tool offset data
Parameters
Common variables
Workpiece offset data
Exceptional process
history data
PLC ladder
R register data
C register data
T register data
Tool life management
data (binary type)
Parameters (binary type) PARAMET.BIN
File system (binary type) FILESYS.BIN
Workpiece coordinate
offset (binary type)
Tool offset data (binary
type)
History data
MR-J2-CT parameter
will be the target.
search engine
File names to be displayed
Files names are displayed with numbers following
O.
Files names are displayed in order.
(Note 1)
ALL
This appears when the following conditions are
satisfied.
• When the "Copy" function is selected
• When the area A device is the "NC MACHINE"
• When there are one or more machining
programs
TOOL.OFS
ALL.PRM
COMMON.VAR
WORK.OFS
ILLEGAL.ERR
USERPLC.LAD
RREG.REG
CREG.REG
TREG.REG
TOOLLIFE.TLF
OFFSET.WRK
OFFSET.TOL
TRACE.TRC
MRJ2CT.PRA
This appears when the following conditions are
satisfied.
• When the "Copy" function is selected
• All the auxiliary axes are mounted on the NC
unit.
I - 267