Copying Files - Mitsubishi Electric MELDAS C6 Instruction Manual

3.4.6 Copying Files

This function is used to copy various data from the NC unit to a storage device such as a memory card,
or vice versa.
The following data in the NC unit can be copied.
1. Machining programs (fixed cycle programs)
2. Tool offset data
3. Parameters
4. Common variables
5. Workpiece offset data
6. Maintenance data
7. Operation history
8. MR-J2-CT parameter
<Precautions>
(1) When overwriting a file in a storage device such as a memory card, the data cannot be copied
(2) When copying data to the NC unit directory and designating a directory other than a machining
(3) The copy source and copy destination file names are changed according to the following
Directory names
Machining
programs
( → Refer to (4).)
Tool offset data
Parameters
Common variables
Workpiece offset
data
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.4 Data In/Out Screen (For only the panel computer)
if the file attributes are read-only.
program, designate the file name of both the copy source and copy destination.
rules.
FILE1 to FILE19 indicate random file names.
File names in
NC unit
ALL
ALL
10
10
20
10
TOOL.OFS
TOOL.OFS
TOOL.OFS
ALL.PRM
ALL.PRM
ALL.PRM
COMMON.VAR
COMMON.VAR
COMMON.VAR
WORK.OFS
WORK.OFS
WORK.OFS
search engine
Direc- Copy destination
tion selection state
→
Not selected (not input)
→
Selected (input)
→
Not selected (not input)
→
Selected (input)
←
Selected
←
Not selected (not input)
→
Not selected (not input)
→
Selected (input)
←
Selected
→
Not selected (not input)
→
Selected (input)
←
Selected
→
Not selected (not input)
→
Selected (input)
←
Selected
→
Not selected (not input)
→
Selected (input)
←
Selected
I - 270
Name of file in memory card
ALL.PRG
FILE1
10.PRG
FILE1
FILE2 (Designate "20" for the
copy destination when 010; is set
in the file.)
FILE3
(010; designated at head of file)
TOOL.OFS
FILE4
FILE4
ALL.PRM
FILE5
FILE5
COMMON.VAR
FILE6
FILE6
WORK.OFS
FILE7
FILE7