Mitsubishi Electric MELDAS C6 Instruction Manual page 302

(2) Menus
Menu
Setting
TIME
/Div
Downloaded from ManualsNet.com
3. Screen Operation When Using a Panel Computer
3.6 NC Alarm Guidance Screen (For only the panel computer)
The following display data setting items will appear.
Select the setting item by touching the line to be selected or by using the UP/DOWN
cursor buttons.
Select the display data from the data select button.
Axis Displays the axis to be displayed in waveform.
If there are multiple axes, the displayed axis can be changed.
Data Select the display data from the following data select buttons.
Data/Div Set the vertical axis scale. (0 to 99999999)
The setting can be changed with
with
Offset Set the vertical axis' basic position. (-999999999 to 999999999)
The setting can be changed with
with
Set the horizontal axis (display range) scale. When this menu is pressed, the display
range in the waveform display area will be highlighted.
The setting can be changed with
scale can be set in the range of 0 to 9999.
search engine
Details
.
.
. The setting digit can be selected with
I - 287
. The setting digit can be selected
. The setting digit can be selected
. The