Spindle Monitor - Mitsubishi Electric MELDAS C6 Instruction Manual

2.7.3 Spindle Monitor

Display item
GAIN
DROOP
SPEED
LOAD
AMP DISP
ALARM
CYC CNT
CMD
STS
UNIT TYP
UNIT NO
S/W VER
WORK TIME
ALM HIST
MNT
/SYS
Downloaded from ManualsNet.com
2. Screen Operation of A985GOT
Spindle position loop gain
Position deflection amount
Motor speed
Motor load
7-segment display of driver
Alarms other than the amplifier display (max. 3 alarms)
Angle data from detection reference position (Z phase)
Control input signal from control unit
Control output signal from driver
This is the spindle type.
This is the spindle manufacturing number.
This is the spindle side software version.
The cumulative ready on time is displayed.
The No. of the spindle alarm that occurred is displayed.
Maintenance history
Status
search engine
2.7 Diagnosis
Explanation
I - 188
C1SP-75
553000A0