Mitsubishi Fuso CANTER Owner's Handbook Manual page 94

5-28
Switches and controls
4. Check if the
If the
goes out.
Z21297
5. Check that the gear position indicator is showing
"P".
Z21298
Z21298
6. Turn the starter switch to the "START" position
to start the engine. When the engine has
started, release the brake pedal.
7. Warm up the engine for 1 to 2 minutes before
starting the vehicle.
NOTE:
Warm up the engine sufficiently. If you do not allow
the engine to warm up sufficiently, it may take time
to shift gears.
6 Driving tips
WARNING
•
When you start the vehicle, never operate
the gearshift lever while stepping on the
accelerator pedal. The vehicle will sud-
denly lurch forward and could cause a
serious accident. Be sure to depress the
brake pedal whenever operating the gear-
shift lever while starting the vehicle.
•
Never race the engine when the vehicle is
stopped. If the gearshift lever happens to
have been placed in any position other
than "P" or "N", the vehicle will suddenly
lurch and could cause a serious accident.
indicator lamp illuminates.
indicator lamp illuminates, wait until it
P. 5-6
P. 5-9