Mitsubishi Fuso CANTER Owner's Handbook Manual page 301

•
When you use tire chains, be sure to install
them without any slack.
•
When fitting tire chains, refer to the instruc-
tions supplied with them.
•
Drive at low speeds, desirably at speeds
lower than 30 km/h, when chains are
installed on wheels.
•
Driving on a dry road with chains installed
may damage the chains as well as the road
surface. Avoid doing so as far as possible.
•
Make sure that the chains and their spring
bands are not excessively worn or otherwise
damaged.
•
If you hear an abnormal noise while driving,
stop the vehicle in the nearest safe place and
check the tire chains.
1. Place the chains over the tires with the hook
ends of cross chains
Z09325
2. Connect the hook
no excess links. Then, take up the slack in the
inside chain by pulling cross chains
inside tire outward.
Z09326
3. Temporarily connect hook
as shown.
Z11190
11-5
facing outward.
of inside chain , leaving
of outside chain
for the