Mitsubishi Fuso CANTER Owner's Handbook Manual page 444

7. Remove the headlamp's bolts
Z22032
8. Raise the headlamp slightly to remove the tabs
from the holes
Z22033
9. Remove the connectors
thus pulled out.
CAUTION
Do not turn the beam adjusting gear
the beam adjusting gear would change the
beam setting, thus creating a nuisance for driv-
ers of other vehicles. If you accidentally turn the
beam adjusting gear, have it inspected by your
nearest authorized MITSUBISHI FUSO distribu-
Z21589
tor or dealer.
•
Headlamp installation
1. Install the connectors
Z12590
13-25
.
, then pull it out toward you.
from the headlamp
on the headlamp.
. Turning