Mitsubishi Fuso CANTER Owner's Handbook Manual page 442

1 Headlamp bulb replacement
For safety and simplicity, bulb replacement is per-
formed with the headlamp removed. The radiator
grill and the front and side turn signal lamp must be
removed before the headlamp can be removed.
1.1 Headlamp removal and installation
•
Headlamp removal
1. For removal of the headlamp
screw
ber
of the vehicle and release it from the tabs
CAUTION
When removing the lamp rubber, do not pull it
with excessive force or the tabs could break.
Z21134
2. Open the door, then loosen the screws
behind the front and side turn signal lamp
until they spin freely.
NOTE:
The screws are designed not to come out.
Z21135
3. Pull out screw
CAUTION
Unless the screw is pulled out, the front and
side turn signal lamp will catch on it and you
will not be able to remove it.
Z09414
4. Close the door.
and rivet , then move the lamp rub-
under the headlamp toward the centerline
toward you.
13-23
, first remove the
.