Mitsubishi Fuso CANTER Owner's Handbook Manual page 157

SET/RES
SET/RES
SET/RES
NOTE:
If you press the SET/RES switch for more than 1
second in the correction coefficient change screen,
the coefficient will return to the default value.
•
The fuel mileages can be indicated in units of
"l/100 km", "mpg", or "km/l".
•
"l/100 km" indicates the amount of fuel in
liters that the vehicle has consumed to cover
a distance of 100 kilometers.
•
"mpg" indicates the miles covered by the
vehicle on one gallon of fuel.
•
"km/l" indicates the kilometers covered by
the vehicle on one liter of fuel.
NOTE:
If the unit for fuel mileage is changed, the unit for
the odometer and trip meter indication changes
accordingly.
•
If "l/100 km" or "km/l" is selected, the unit for the
odometer and trip meter indication becomes
"km".
•
If "mpg (USA)" or "mpg (UK)" is selected, the
unit for the odometer and trip meter becomes
"mi (mile)".
1. Press the MODE switch
mileage information mode
2. Press the SET/RES switch
adjustment screen
switch. Each time you press the switch, the dis-
play toggles between the fuel mileage correction
coefficient (FUEL ADJUST)
age unit (SELECT UNIT)
3. With the desired display selected, press the
SELECT switch
the correction coefficient or fuel mileage unit.
•
Press the SELECT switch to increase the cor-
rection efficient, or the MODE switch to
decrease it. Continue to press each switch if you
want to change the value quickly.
•
Use the SELECT switch to change the fuel mile-
age unit. The unit changes in the following
sequence each time you press the switch:
"l/100 km" → "mpg (USA)" → "mpg (UK)" → "km/l"
4. Press the SET/RES switch to return to the initial
display screen.
Z21985
to select the fuel
.
to display the
, then press the SET/RES
and the fuel mile-
.
or MODE switch to change
6-15