Mitsubishi Fuso CANTER Owner's Handbook Manual page 49

4-4
Seat and steering wheel adjustments
2 Assistant driver's seat
Assistant driver's seat
Center seat
Pulling the seatback lever
be tipped forward. Use this function when you wish
to access the tool stowage space. After returning
the seatback to its original position, gently rock it to
make sure it is locked in place.
NOTE:
If the lever
ing the top of the seatback rearward. Then you will
be able to pull the lever easily.
Z21961
3 Rear seat – Crew-cab models
Storage compartments
seat. The rear seat can be folded up for access to
them. When you wish to stow or remove something
from these compartments, release the clamps
the base of the seat and raise the seat cushion
To retain the seat cushion, use the retaining bands
that are attached to the seatback. Fit the loop
at the end of each retaining band over the corre-
sponding hook
Z22463
After using this storage, return the rear seat to the
original position and lock it by fully fastening the
clamps.
CAUTION
Do not put any objects in the storage compart-
ments
erwise,
overheating.
is difficult to move, pull it while push-
are located under the rear
on the seat cushion.
on which a heater unit is installed. Oth-
the unit may
allows the seatback to
be damaged
at
.
by