Mitsubishi Fuso CANTER Owner's Handbook Manual page 43

3-14
Opening and closing
The power window switches function only when the
starter switch is in the "ON" position.
On the driver's door, there are two switches: switch
for controlling the driver's window and switch
for controlling the assistant driver's window.
The switch for the driver's window has an auto func-
tion for fully opening or fully closing the window with
a single touch of the switch.
Switch for assistant driver's window.
•
Manual operation
Gently press the switch to open the window. The
window will move only while you are pressing
the switch. It will stop when you release the
switch.
Gently pull the switch to close the window. The
window will move only while you are pulling the
switch. It will stop when you release the switch.
•
Auto function
To fully open the driver's window with a single
touch of the switch, press the switch firmly. If
you wish to stop the window part-way, give the
switch a gentle pull.
Z22223
To fully close the driver's window with a single
touch of the switch, pull the switch firmly. If you
wish to stop the window part-way, give the
switch a gentle push.
CAUTION
Do not keep any door or window open in rainy
weather, and be careful not to spill a drink on
any of the window switches. If water or any
other liquid gets on a window switch, it can
cause a malfunction.
NOTE:
In cold weather, the auto function may not work
temporarily. In this event, open or close the window
by the manual operation.
2 Window regulator handle
<Crew-cab models>
Turn the window regulator handle
close the window.
Open
Close
Z20946
to open or