Mitsubishi Fuso CANTER Owner's Handbook Manual page 256

10-4
Interior equipment and accessories
1.4 Alarm button
It is possible to have an alarm sound at a user-
selected time.
•
Setting the alarm
1. Press the alarm button for at least two seconds.
A beep will be emitted, and the time indication
and
Z11563
2. Use the tuning buttons to set the time at which
you want the alarm to sound. Use the
to set the hour and the
utes. If you wish to change the hour or minutes
quickly, keep the relevant button pressed.
Z11564
3. Press the alarm button. The alarm will be set,
and the flashing of the display will stop and it will
return to its original indications.
Z11565
•
Turning the alarm ON/OFF
Each time the alarm button is pressed, the alarm
toggles from ON to OFF or vice versa. When the
alarm is ON, the
nated. When the alarm is OFF, the
illuminated.
When the alarm is ON, it sounds for three minutes
from the user-selected time. If you are listening to
the radio when the alarm starts sounding, you will
hear the alarm together with the radio. To stop the
alarm once it has started sounding, press a button
other than the power button. If you press the power
button, the radio will turn ON/OFF (as relevant).
mark will start flashing on the display.
mark in the display is illumi-
button
button to set the min-
mark is not