Mitsubishi Fuso CANTER Owner's Handbook Manual page 206

NOTE:
If you wish to temporarily stop the dump body part-
way while raising or lowering it, hold the lever
between the "up" and "down" positions with the but-
ton pressed.
•
Vehicles with a DUONIC system
1. Apply the parking brake while holding down the
brake pedal.
2. Place the gearshift lever in the "P" position, and
keep the engine idling.
Z21005
3. Push the PTO switch
cator on the multi-information display
come on. When PTO engagement is complete,
the
Z21006
4. Move the dump lever to the "up" position
while pressing the button
will come on, and the dump body will move
upward. If you press the accelerator pedal, the
dump body will move upward faster. If you
release the button, the dump lever will lock in
place.
CAUTION
The dump lever does not lock between the "up"
Z21575
and "down" positions. If you temporarily stop
the dump body in a part-raised or part-lowered
position, do not release the dump lever. If you
released the dump lever, the dump body could
move upward or downward, resulting in an acci-
dent.
to turn it on. The
indicator will come on.
8-9
indi-
will
. The indicator