Mitsubishi Fuso CANTER Owner's Handbook Manual page 307

NOTE:
Onboard tools are different according to models.
Tool bag
Spanners (set of two)
Screwdriver
Pliers
Socket wrench (for wheel nuts)
Wrench handle (for wheel nut wrench and
hydraulic jack)
Spare tire handle (for removal and installation of
spare tire) <Other than the following vehicles>
Spare tire handle (for removal and installation of
spare tire) <Standard width single-cab models
(excluding FEA0)>
Hydraulic jack
Tire valve cap tool (for removal and installation
of tire valve cap) <Except vehicles for some
markets>
2 Tool storage location
<All models except Crew-cab models>
•
The onboard tools are stowed at the back of the
driver's seat and assistant driver's seat. When
you wish to use them, fold the seatbacks for-
ward to gain access to them.
Z19626
<Crew-cab models>
•
The onboard tools are stowed in the compart-
ment under the rear seat. Undo clamps
the rear seat and raise the seat. Keep the seat
raised by holding it with support strap(s)
Z10670
12-5
on
.