Mitsubishi Fuso CANTER Owner's Handbook Manual page 437

13-18
Useful advices for emergencies
Fuse
No.
*: On vehicles with battery equalizer, the voltage of
this circuit is 24 V.
2 High-current fuse
The high-current fuses, which protect circuits in the
same way as regular fuses, are fitted in a box next
to the battery. If a high-current fuse is blown, most
of the vehicle's electrical circuits become inopera-
tive.
2.1 Inspection
1. Place the starter switch in the "LOCK" position
and turn all other switches OFF.
2. Pry and release the two locks
with your fingers and remove the cover. To
install the cover, push in the cover until the two
locks click.
Z21129
3. Check for a blown high-current fuse by looking
into the inside through inspection window
If it is blown, immediately call your nearest
authorized MITSUBISHI FUSO distributor or
dealer and have them check your vehicle.
Z21426
Amperage Protected circuit
10A
15A
20A
30A
Spare fuse
of the cover
.