Mitsubishi Fuso CANTER Owner's Handbook Manual page 226

7. After the adjustment, perform a test by restarting
the vehicle on a slope. If the brake release tim-
ing is not adjusted as desired, readjust it on a
level surface.
NOTE:
•
If you cannot adjust the brake release timing as
desired using the hill start assist system adjust-
ing switch, have the vehicle inspected by an
authorized MITSUBISHI FUSO distributor or
dealer.
•
If you use the hill start assist system about 100
times after setting the brake release timing
using the hill start assist system adjusting
switch, the system updates its neutral brake
release timing to this setting.
•
After adjusting the brake release timing to the
"FAST" side, the brakes may fail to be released
if you restart the vehicle without fully depressing
the clutch pedal. If this condition happens,
depress the clutch pedal as far as it goes. If the
brakes are still not released, have the vehicle
inspected by an authorized MITSUBISHI FUSO
distributor or dealer.
8-29