Mitsubishi Fuso CANTER Owner's Handbook Manual page 153

1. Give a long press on the SET/RES switch
while the date and time indication
on the screen. The adjustment screen
appear.
2. Each time you press the SET/RES switch, one
of the indication items is selected in the
sequence shown below with the selected item
flashing. The cycle repeats if you press the
switch repeatedly.
Initial display screen (date/time display)
Time display mode
→ Hour
Day
screen
While the item you want to set is flashing, press
the MODE switch
make adjustments.
•
The 12-hour clock will be displayed if you select
"12 h" on the time display mode screen; select-
ing "24 h" will change the display to the 24-hour
clock.
•
Press the SELECT switch to advance the indi-
cation. Each long press (0.5 second or longer)
will move the value forward by 2 years, 2
months, 2 days, or 10 minutes.
•
Press the MODE switch to retard the indication.
Each long press (0.5 second or longer) will
move the value backward by 2 years, 2 months,
2 days, or 10 minutes.
3. After completing necessary adjustments, press
the SET/RES switch.
4. Press the SET/RES switch as many times as
necessary to go back to the initial display
screen.
•
Adjusting the clock to time signals
While the display is in the calendar and clock
mode, you can adjust the clock to a time signal
by pressing the SET/RES switch and releasing
the switch simultaneously with a time signal.
Example:
The clock will be adjusted to 11:00
if its current indication is between 11:00 and
11:29.
The clock will be adjusted to 12:00
if its current indication is between 11:30 and
11:59.
NOTE:
•
If the date is set, the day of the week will be
automatically adjusted to the new date.
•
The calendar can be adjusted for the period
between January 1, 2009 and December 31,
2039.
is displayed
→ Year → Month
→ Minute → Initial display
or SELECT switch
6-11
will
→
→
to