Mitsubishi Fuso CANTER Owner's Handbook Manual page 161

•
Resetting of maintenance information
After replacing a periodic replacement item such as
the oil, filter element, or engine coolant, reset the
maintenance information for the item as follows:
1. Press the MODE switch
nance information mode.
2. Press the SELECT switch
for which the maintenance information is to be
reset.
3. Give a long press (1 second or more) on the
SET/RES switch
information.
Z21990
NOTE:
Do the same procedure after replacing any periodic
replacement item.
3.7 Illumination intensity (brightness adjust-
ment)
•
Selection and adjustment of illumination
intensity
•
Both the illumination intensity screen and the
adjustment screen provide different displays
between the time when the light switch is in the
"OFF" position and the time when the switch is
in the
•
When the light switch is in the "OFF" posi-
tion, the multi-information display indicates
"DISP (DAY)" or "GAUGE (DAY)". In this
state, the brightness of the displays or
gauges under no illumination condition (day-
time) is adjustable.
•
When the light switch is in the
position, the multi-information display indi-
cates "DISP (NIGHT)" or "GAUGE (NIGHT)".
In this state, the brightness of displays or
gauges when lit (nighttime) can be adjusted.
•
The brightness of the following display and
gauges can be adjusted as follows.
•
Z22083
When "DISP (DAY)" or "DISP (NIGHT)" is
displayed:
Multi-information display
•
When "GAUGE (DAY)" or "GAUGE (NIGHT)"
is displayed:
Urea level indicator
•
When "GAUGE (NIGHT)" is displayed:
Illumination of the air conditioner and heater
control panel and the scales of the speed-
ometer, tachometer, and fuel gauge (when
the light switch is in the
to select the mainte-
to reset the maintenance
or position as follows:
6-19
to select the item
or
or position)