Wiper Blade - Replacement - Mitsubishi Fuso CANTER Owner's Handbook Manual

12-100
Simple inspection and service
Wiper blade – replacement
1 Replacing wiper blade
1. Raise wiper arm
in the direction of the arrow (see figure).
Z05978
2. With the clip spring kept in the pushed position,
press wiper
Z05979
3. The wiper blade will come off the wiper arm.
Install a new blade in the reverse order of
removal.
Use a MITSUBISHI genuine replacement part.
CAUTION
Do not bring the wiper arms back into position
or operate the wipers without wiper blades, as
this could scratch the windshield.
Z05980
2 Replacing blade rubber only
1. Raise the wiper arm.
Pinch both sides (indicated by arrows) of blade
rubber
blade rubber so that claws
grooves
2. Slide out the blade rubber.
3. Replace the old blade rubber with a new
MITSUBISHI genuine wiper blade rubber.
To install, reverse the removal procedure. Make
Z09332
sure that the claws fit into the grooves in blade
rubber.
, and then push clip spring
toward the wiper arm.
with your fingers and then pull the
are unhooked from
in the blade rubber.