Mitsubishi Fuso CANTER Owner's Handbook Manual page 207

8-10
Handling special equipment
NOTE:
If you wish to temporarily stop the dump body in
part-way while raising or lowering it, hold the lever
between the "up" and "down" positions with the but-
ton pressed.
5. The dump body will automatically stop when it
reaches its highest position.
6. Push the PTO switch
Z21007
2.2 Lowering the dump body
1. Run the engine at idling speed or shut it down.
2. Place the dump lever in the "down" position
while pressing the button
move downward. If you release the button, the
dump lever will lock in place.
CAUTION
•
The dump lever does not lock between the
"up" and "down" positions. If you tempo-
rarily stop the dump body in a part-raised or
Z09023
part-lowered position, do not release the
dump lever. If you released the dump lever,
the dump body could move upward or down-
ward, resulting in an accident.
•
Operate the dump lever slowly. Abruptly
stopping the dump body or abruptly revers-
ing its movement while it is moving down-
ward
malfunction.
NOTE:
To temporarily stop the dump body while it is mov-
ing downward, hold the lever mid-way between the
"up" and "down" positions with the button pressed.
to turn it off.
could cause the
. The dump body will
mechanism to