Mitsubishi Fuso CANTER Owner's Handbook Manual page 260

10-8
Interior equipment and accessories
5. Press the MEMO button to program the station
into memory.
Z11574
•
Automatic programming by use of AS button
1. Select a desired AM band (AM1 or AM2) or FM
band (FM1 or FM2).
Z11575
2. Press the AS button for two or more seconds.
After a short beep, stations with sufficiently high
signal levels are automatically memorized one
after another while these stations are being set
to each of CH1 to CH6, beginning with the sta-
tion of lowest frequency.
Repeat the same procedure for the remaining
bands.
Z11567
CAUTION
•
If the station programming procedure is per-
formed for a channel to which another sta-
tion is already programmed, the previously
memorized station will automatically be can-
celled and the newly programmed station
will be assigned to the channel.
•
The stations programmed in each channel
are erased if the battery or fuse is discon-
nected for an extended time. In this case,
you will need to repeat the station program-
ming procedure.