Mitsubishi Fuso CANTER Owner's Handbook Manual page 393

2. Mount the wheel so that the wheel bolts line up
with the bolt holes in the disc wheel. Then,
tighten the wheel nuts to hold the disc wheel in
position. Direct the spherical end
nut toward the disc wheel.
WARNING
When installing the wheel, take care not to
damage the threads on the wheel bolts and
inner wheel nuts.
NOTE:
•
The wheel bolts and nuts on the right-hand
wheels have right-hand threads, and those on
the left-hand wheels have left-hand threads.
The bolts and nuts have stamped marks
easy identification; an "R" mark for right-hand
Z17050
wheels and an "L" mark for left-hand wheels.
•
On the 6-stud wheels, wheel nuts
wheel nuts
marked with "ST" or "S·A". The "ST" mark indi-
cates that these fasteners are for steel wheels
and the "S·A" mark indicates that they are for
both steel and aluminum wheels.
Z18461
3. Lower the vehicle gently until the tire makes
contact with the ground.
and inner wheel nuts
12-91
of the wheel
for
, outer
are