Water Temperature Gauge - Mitsubishi Fuso CANTER Owner's Handbook Manual

•
The water temperature gauge is displayed on
the multi-information display and indicates the
temperature of the engine coolant.
•
With the engine running normally, the coolant
temperature indicator
middle point of the scale.
•
If the coolant temperature becomes abnormally
high, the multi-information display
in amber.
•
If the engine overheats, the
will light up and the multi-information display will
show
cator will show the 13th gradation or above, indi-
cating the overheating zone.
•
When the engine has overheated, perform the
checks and corrective steps described on this
reference page:
Z22074
CAUTION
Be sure to stop the engine only after letting it
run at a speed slightly above the idling RPM
until the coolant cools down. Turning off the
engine immediately after stopping will cause the
coolant temperature to rise quickly and may
cause the engine to seize up.

Water temperature gauge

in red. The coolant temperature indi-
6-3
will indicate around the
will show
warning lamp
P. 13-10