Mitsubishi Fuso CANTER Owner's Handbook Manual page 201

8-4
Handling special equipment
2 Manual transmission vehicles
2.1 Engaging the PTO
1. Make sure the parking brake is applied.
2. Make sure the gearshift lever is in the neutral
position.
3. Hold down the clutch pedal
engine. When the engine has warmed up, keep
it idling.
4. Check that the
If it is flashing, perform parked DPF regenera-
tion before engaging the PTO.
Z15658
5. Hold the clutch pedal down fully and push the
PTO switch
6. Check that the
tion display has come on, then slowly release
the clutch pedal to engage the PTO.
Z21010
2.2 Disengaging the PTO
1. Hold the clutch pedal down fully and push the
PTO switch
2. Check that the
tion display goes off.
Z21007
indicator lamp is not flashing.
to turn it on.
indicator on the multi-informa-
to turn it off.
indicator on the multi-informa-
and start the