Mitsubishi Fuso CANTER Owner's Handbook Manual page 447

13-28
Useful advices for emergencies
•
Removal
1. Remove the cover
the cover.
2. Detach the spring
3. Pull out the bulb.
•
Installation
1. Install the bulb in the lamp unit while aligning the
tabs
with the spring.
2. Clean the inside of the cover, if necessary.
Z15835
3. Install the cover by pushing it until the bulb end
is exposed a little. Push the shaded area
when installing the cover.
Z15839
1.3 Clearance lamp bulb replacement
1. Turn the socket
to remove it.
2. Remove the bulb
3. Perform installation by following the removal
steps in reverse.
4. If the packing
Z11276
2 Front and side turn signal lamp bulb
replacement
1. Open the door.
2. Turn the socket
remove it.
3. Press the bulb
arrow
4. Perform installation by following the removal
steps in reverse.
5. If the packing
Z18507
by pulling on the lugs
retaining the bulb
with the grooves
in the direction of the arrow
.
is dirty, clean it.
in the direction of arrow
and turn it in the direction of
to remove it.
is dirty, clean it.
.
, then secure the bulb
of
to