Mitsubishi Fuso CANTER Owner's Handbook Manual page 202

3 Vehicles with a DUONIC system
3.1 Engaging the PTO
1. Make sure the parking brake is applied.
2. Make sure the gearshift lever is in the "P" posi-
tion.
3. Hold down the brake pedal and start the engine.
When the engine has warmed up, keep it idling.
4. Check that the
If it is flashing, perform parked DPF regenera-
tion before engaging the PTO.
Z21005
5. Push the PTO switch
6. The
will come on. When PTO engagement is com-
plete, the
NOTE:
Depending on conditions, the
come on. This phenomenon does not mean there is
an abnormality.
Z21469
3.2 Disengaging the PTO
Push the PTO switch
and
go off.
Z21007
indicator lamp is not flashing.
to turn it on.
indicator on the multi-information display
indicator will come on.
to turn it off. Check that the
indicators on the multi-information display
8-5
indicator may not