Mitsubishi Fuso CANTER Owner's Handbook Manual page 336

12-34
Simple inspection and service
5. Add oil through the inspection plug hole until it
reaches the opening of the hole.
Put your finger straightly into the inspection plug
hole after one minute has passed, and check
that the oil surface
hole
6. Like with the drain plug, replace the gasket of
the inspection plug with a new one, coat the
threads on the plug with sealant, and then install
and tighten the plug.
Z18456
Sealant
Tightening torque
4 Transfer gear oil <FG models>
Replacement intervals
Recommended oil:
Gear oil
Classification
API GL-4
API GL-4*
*: Use API GL-4 oil with vehicles for Australia and
New Zealand.
Quantity required:
Quantity
reaches the opening of the
.
ThreeBond 1105
68.6 ± 14.7 N·m
(7.0 ± 1.5 kgf·m)
Every 60,000 km or
24 months
Condition
General
Warm region
General
Warm region
Approx. 3.6 liters
Viscosity
SAE viscosity
number
80
90
80
90