Mitsubishi Fuso CANTER Owner's Handbook Manual page 131

Indication by
PM indicator
When the number of displayed segments
is 1 to 6:
1.2 PM indicator
If you select the DPF monitor on the multi-informa-
tion display, you can check the amount of PM col-
lected in the DPF.
•
Select the DPF monitor mode by pressing the
MODE switch
•
The PM indicator shows the amount of PM in 9
degrees. The number of segments increases or
decreases as the amount of PM changes. In
addition, the color of the symbol
follows:
Z22095
Green: When the number of displayed
Amber: When the number of displayed
1.3 PM indicator and warning/indicator lamp
•
The PM indicator and warning/indicator lamp
either light or flash according to the amount of
PM in the DPF.
•
Perform parked DPF regeneration if prompted
by the warning/indicator lamp as well as by the
PM indicator on the multi-information display.
Warning/indicator
Z22096
to see the PM indicator
segments is 1 to 6
segments is 7 to 9
Parked/automatic
lamp regeneration
–
5-65
.
changes as
Ref.
page
– –