Mitsubishi Fuso CANTER Owner's Handbook Manual page 218

1 Replacing the fuses related with hill
start assist system
WARNING
Be sure to set the starter switch to "LOCK"
and turn off all other electric switches when-
ever replacing fuses or high-current fuses.
Replacing any fuses or high-current fuses
while electric circuits are still live could dam-
age related electric equipment. Especially, if
a vehicle with a hill start assist system is
stopped on a slope by activating the system
and the fuses and the high-current fuse pro-
tecting its circuits are inadvertently removed,
the pressure holding the brakes will be
released and the vehicle will start moving
down, possibly causing an accident.
•
Refer to the section "When a fuse has blown" for
the correct method of replacing the fuses.
2 Checking operation of hill start assist
system
Before using the hill start assist system, check it is
working properly as follows.
WARNING
Perform the check on a level surface, only
after making sure that the area around the
vehicle is safe.
1. Make sure that the parking brake is firmly
applied.
2. Make sure that the gearshift lever is in neutral.
3. Start the engine.
Z15664
8-21
P. 13-11