Mitsubishi Fuso CANTER Owner's Handbook Manual page 166

6-24
Instruments and warning lamps
2.3 Engine system warning
•
Red warning
If an engine system warning is shown, have the
vehicle inspected by the nearest authorized MITSU-
BISHI FUSO distributor or dealer.
•
Amber warning
If an engine system warning is shown, have the
vehicle inspected by the nearest authorized MITSU-
BISHI FUSO distributor or dealer.
Z21711
2.4 Transmission oil temperature warning
<Vehicles with DUONIC system>
This warning is displayed when the clutch control
fluid temperature is too high.
If this indication appears while driving, stop the
vehicle in a safe place and do the following:
1. Firmly apply the parking brake and move the
gearshift lever to "P".
2. Run the engine at a speed slightly higher than
the idling speed. If the indication goes out, you
may continue driving. If the indication remains
Z21712
displayed, contact your nearest authorized
MITSUBISHI FUSO distributor or dealer.
2.5 Transmission control warning
<Vehicles with DUONIC system>
•
Red warning
The red transmission control warning is displayed
when the DUONIC system is faulty.
If this indication appears while driving, stop the
vehicle in a safe place and do the following:
1. Firmly apply the parking brake and move the
gearshift lever to "P".
2. Turn the starter switch to "ACC" or "LOCK".
3. Turn the starter switch to "ON".
Z21713
4. If the indication remains displayed, avoid con-
tinuing to drive and contact your nearest autho-
rized MITSUBISHI FUSO distributor or dealer.
•
Amber warning
The amber transmission control warning is dis-
played when the DUONIC system is faulty (but
automatic or manual gear shifting is possible).
•
If driving in the automatic shift mode is possible,
you may continue to drive but must have the
vehicle inspected by an authorized MITSUBISHI
FUSO distributor or dealer as soon as possible.
•
If no automatic gearshift takes place when driv-
ing in the automatic gearshift mode, stop the
vehicle in a safe place and do the following: