Mitsubishi Fuso CANTER Owner's Handbook Manual page 158

6-16
Instruments and warning lamps
SELECT
3.6 Maintenance information
If you select this mode, the multi-information display
indicates the running distance
months
replacing oils, fluids, or filter elements according to
your selection of screen.
Z21986
•
Selection of maintenance information screens
SELECT
SELECT
1. Press the MODE switch
nance information mode
2. Press the SELECT switch
press the switch, the screen changes to the one
for a new replacement item in the following
sequence, beginning with the previously dis-
played screen:
ENGINE OIL → OIL FILTER (engine oil filter)
→ FUEL FILTER → BRAKE FLUID → AIR FIL-
TER → T/M OIL (transmission oil and clutch
control fluid in a vehicles with a DUONIC sys-
tem) → HUB GREASE (wheel hub bearing
grease) → DIFF OIL (differential oil) → P/S OIL
(power steering oil) → ENG COOLANT (engine
coolant)
since the distance was last reset after
SELECT
and the number of
SELECT
Z21987
to select the mainte-
.
. Each time you