Mitsubishi Fuso CANTER Owner's Handbook Manual page 449

13-30
Useful advices for emergencies
5 Interior lamp bulb replacement
5.1 Interior lamp
1. Insert a flat-blade screwdriver
notches
the top of the lens
2. Push the bulb retainer
arrow
3. To install the lens, insert the tabs
tom of the lens, align the tabs on the top of the
lens, and press the lens into place.
Z11279
5.2 Interior lamp with built-in spot lamps
<Vehicles with interior lamp with built-in
spot lamps>
1. Insert a flat-blade screwdriver into the notches
and use it to release the tabs
end of the lens
2. Remove the bulb
wise while pushing inward.
3. Install the lens by inserting the tabs
tom end of the lens into the slots and pushing
the lens while aligning the tabs on the top end
Z09127
with the notches.
5.3 Interior lamp of rear seats of Crew-cab
models
1. Insert a flat-blade screwdriver
lens
release the tabs
Remove the lens.
2. Push the bulb retainer
the bulb
3. To install the lens, insert the tabs
the lens and press the bottom of the lens into
place.
Z09125
6 Fluorescent lamp <other than Crew-cab
models>
1. Remove the screw
driver, then remove the lens
2. Turn and remove the fluorescent tube
new fluorescent tube.
3. When installing the lens, fit the tab
into the slot
using the screw.
Z09129
and use it to release the tabs
. Remove the lens.
in the direction of the
and remove the bulb
. Remove the lens.
by turning it counterclock-
and the interior lamp
on the bottom of the lens.
rightward and remove
.
using a crosspoint screw-
. Retain the other end of the lens
into the
on
.
on the bot-
on the top
at the bot-
between the
and use it to
on the top of
.
. Fit a
on the lens