Mitsubishi Fuso CANTER Owner's Handbook Manual page 54

•
Fastening
1. Hold tongue
belt locks or is difficult to extend, let it retract and
pull it gently again.
2. Taking care that the belt does not become
twisted, insert the tongue into the buckle
you hear a click.
3. Pull on the tongue to confirm that it is locked in.
4. Adjust the belt so it is across your hips and
shoulder.
Z08771
•
Unfastening
1. Press the red button
2. The belt automatically retracts when unlocked.
To prevent the tongue causing damage or injury,
hold it while the belt retracts.
2.1 Seat belt anchor
<Driver's seat>
WARNING
The shoulder belt can be dangerous if worn
across the neck. Adjust its position so that it
does not cross over the neck.
Adjust the seat belt anchor
Z08772
to ensure that the belt passes across your shoulder.
You will need to keep the lock button
moving the seat belt anchor downward. When the
seat belt anchor has reached the desired position,
release the lock button and jiggle the seat belt
anchor up and down to make sure it is locked in
place.
3 2-point seat belt
•
Fastening
1. Taking care that the belt does not become
twisted, insert the tongue
until you hear a click.
2. Pull on the tongue to confirm that it is locked in.
3. Adjust the belt so it is low across your hips.
4. To adjust the belt's length, hold the tongue at
90° to the belt.
Pull the belt end to shorten the belt or the
Z08774
tongue to lengthen it.
To lengthen
To shorten
and gently extend the belt. If the
to unlock the buckle.
upward or downward
into the buckle
4-9
until
pulled while