GEDRAFT
D
5604324, R
IRECTION
EVISION
3-12-2
Wired Ethernet from LOGIQ P9/P7 to a Workstation
3-12-2-1
Direct Cable Connection from the LOGIQ P9/P7 to a Workstation via a Crossover Cable.
You will only need a Crossover Cable for network use to connect the two units this way.
1) Connect one end of the crossed network cable to the network connector on the LOGIQ P9/P7.
2) Connect the other end to the network connector to the Workstation, see the Workstation Service
Manual.
3-12-2-2
Connection via a Peer-to-Peer Network
You will need a network switch and one network cable for each unit connected to the switch.
3-12-2-3
Connection via Hospital Network
3-12-2-4
You will need one network cable to connect the LOGIQ P9/P7 to a wall outlet on the hospital's network.
3-12-3
Connection using Wireless Option
Refer to:
-
-
11
DRAFT (J
Chapter 5 for theory.
LOGIQ P9/P7 Basic User Manual: Chapter 16 Configuring Connectivity.
Chapter 3 - Setup Instructions
24, 2019)
ANUARY
LOGIQ P9/P7
S
M
ERVICE
ANUAL
3-57