Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
AquaCoat cabinet
RH side wall (from the inside)
Pos Designation
30
Grounding switch
31
Grounding cylinder
32
Leakage resistance 3 GOhm
33
Potential equalization connection of the
stripped part of the product hose (for Cobra)
34
Passageway for product hose
35
Connection for grounding cable for grounding
the conductive sheath of the product hose.
36
Grounding point
5.2
MODE OF OPERATION
The AquaCoat spray system is designed for processing non-combustible liquids (water-
based lacquers) in accordance with the AirCoat method.
The spray product is regulated via the trigger guard on the gun (4) and the VM 5020W (3)
control unit. It is drawn in in the sealed off inner chamber of the AquaCoat cabinet (1) with
a product pressure generator (11) via a suction system (13), electrostatically charged and
sprayed in the nozzle of the spray gun using the AirCoat process.
The product pressure generator and spray gun are connected by the shielded, high-pressure
product hose.
ORDER NUMBER DOC 2366600
34 35
32
30
33
36
B_05913
34
31
23
Advertisement
Table of Contents
