Product Supply - WAGNER AquaCoat 5010 Translation Of The Original Operating Manual

EDITION 02/2016
OPERATING MANUAL
6.5.4

PRODUCT SUPPLY

Impurities in the spraying system!
Spray gun blockage, products harden in the spraying system.
Flush the spray gun and paint supply with a suitable fl ushing agent.
Bursting hose, bursting threaded joints!
Danger to life from injection of product.
Electrical discharges!
Danger due to electrically charged product lines.
ORDER NUMBER DOC 2366600
NOTICE
DANGER
Ensure that the hose material is chemically resistant to the
sprayed products.
Ensure that the spray gun, threaded joints and product hose
between the device and the spray gun are suitable for the
pressure generated in the device.
Ensure that the following information can be seen on the high-
pressure hose:
- Manufacturer
- Permissible operating pressure
- Date of manufacture
WARNING
The conductive sheath of the product hose must not be
removed and the connections to the ground potential must not
be loosened:
- Gun side: Do not disconnect the product hose from the hose
holder.
- Cabinet side: Do not loosen the cabinet's knurled nut and
the grounding cable in the cabinet.
49