Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
5.6.2
PRODUCT PRESSURE GENERATOR
5.6.2.1
PUMA 28-40 PE+TG PNEUMATIC PISTON PUMP
The pump is equipped with a special AquaCoat compressed air connection (see below).
All other relevant information can be found in the IceBreaker-operating manual (Order No. see Chapter 1.3.1).
AquaCoat compressed air connection for Puma
The AquaCoat control unit controls the pressure air
("Pomp pressure" regulator, see Chapter 5.6.1.1).
1 Ball valve
2 Compressed air inlet
3 Safety valve
4 Compressed air input for the air motor reversing
valve (mains pressure)
Positions of the ball valve
A Open: Working position.
B Closed: The air motor may still be under
pressure.
C Vent: Pull the ring on the safety valve to vent.
Operating pressure in the air motor is vented
(control air pressure is still present).
ORDER NUMBER DOC 2366600
1
A
B
C
B_05880
2
2
4
3
36
Advertisement
Table of Contents
