Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
10.3
MOUNTING MATERIALS
In Chapter 14 the order numbers for device spare parts can be found, as well as for wearing
parts such as seals.
Use torques, greases and glues in accordance with Chapter 14. Spray gun in accordance
with Chapter 10.4.
Mounting materials
Order No.
Quantity
1 pc ≙ 50 ml
9992511
1 pc ≙ 150 g
9992528
1 pc ≙ 50 ml
9992831
1 pc ≙ 1 kg can
9992616
1 pc ≙ 100 g
9992609
1 pc ≙ 200 g can
9992698
Brand notice
The brands specifi ed in this document are property of the respective owners. Loctite , for
example, is a registered brand of Henkel.
10.4
SPRAY GUN
Plastic parts
Gently handle all plastic parts.
10.4.1
TOOLS
For disassembling and assembling the spray gun, the following tools are required:
- Allen wrench SW 2
- Allen wrench SW 3
- Allen wrench SW 5
- Open-end wrench SW 5
- Open-end wrench SW 6
- Open-end wrench SW 8
- Open-end wrench SW 11
- Open-end wrench SW 12
- Open-end wrench SW 14
- Open-end wrench SW 19
ORDER NUMBER DOC 2366600
Designation
Loctite 243
Loctite 270
Loctite 542
Molykote DX grease
Anti-seize paste
Vaseline white PHHV II
- Ring spanner SW9
- Ring spanner SW11
- Torx wrench 20
- Torx wrench 25
- Slide gauge
- Valve needle assembly tool,
Order No. 2309368
- Clamping screw assembly tool,
Order No. 2325263
Only as required:
- Handle seal assembly tool
(Order No. 2342334, not
included in scope of delivery)
Smaller tanks
50 g tube ≙ Order no. 2355419
103
Advertisement
Table of Contents
