Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
25
Fitting (25)
If the fi tting (25) does not come out with the product hose, it must be removed from the
gun adapter as follows:
- Screw the wood screw ( 3 mm; 0.12 inches, length 40 mm; 1.6 inches) into the fi tting (25),
max. 6 mm deep.
- Pull out straight with suitable pliers. Possibly rotate clockwise simultaneously.
- Thereafter, the fi tting must be replaced.
If the fi tting is broken in the gun adapter, WAGNER Service must be contacted.
5
Valve needle assembly tool,
Order No. 2309368
Clamping screw assembly tool,
Order No. 2325263
ORDER NUMBER DOC 2366600
4
SW19
B_05883
SW19
27
SW9
Valve housing: Use an assembly tool or socket or ring spanner
(no open-end wrench).
Carefully release the
cascade without pliers
Do not tilt the product hose, but pull it
straight out in the direction of arrow.
At the same time, execute slight rotational
movements.
Valve tip (27)
Loosen valve tip by hand using
the valve needle assembly tool
(Order No. 2309368).
B_05886
105
Advertisement
Table of Contents
