Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
4.2.5
HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS
When preparing or working with lacquer and when cleaning the device, follow the
working instructions of the manufacturer of the lacquers, solvents and cleaning agents
being used.
Take the specifi ed protective measures. In particular, use personal protective equipment:
safety goggles, protective clothing and gloves, as well as respiratory protection and
skin protection cream if necessary.
Use a mask or breathing apparatus if necessary.
For suffi cient health and environmental safety: Operate the device in a spray booth or
on a spraying wall with the ventilation (extraction) switched on.
Wear suitable protective clothing when working with hot products.
4.2.6
TOUCHING HOT SURFACES
Only touch hot surfaces if you are wearing protective gloves.
When operating the device with a coating product with a temperature of > 43 °C; 109 °F:
identify the unit with a warning label that says "Warning - Hot Surface".
- Instruction label
- Protection label
Note: Order the two stickers together.
4.3
PROTECTIVE AND MONITORING EQUIPMENT
Protective and monitoring equipment must not be removed, modifi ed or rendered
unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must not
be operated until these defects are remedied.
4.4
SAFETY-RELEVANT INFORMATION ABOUT DISCHARGES
The plastic parts of the cabinet are charged electrostatically by the high-voltage fi eld.
Contact with plastic parts harmless discharges (brush discharges) may occur. They are
completely non-hazardous for human health.
ORDER NUMBER DOC 2366600
Order no. 9998910
Order no. 9998911
19
Advertisement
Table of Contents
