Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
6.5.1
ASSEMBLING THE AQUACOAT SYSTEM
Accessories (option)
1. - Mount underframe with rolls, according to the assembly manual 2367143.
- Mount hose holder in accordance with Chapter 14.5.4.
- Mount gun holder in accordance with Chapter 14.5.5.
- Place tub insert into AquaCoat cabinet.
Pomp set
All required parts are included in the scope of delivery of the pump set (see Chapter 14.3).
The cabinet contains two air hoses:
- The air hose 10 mm; 0.39 inch is connected with the control unit, pump air connection.
- The air hose
8 mm; 0.32 inch is not used for AirCoat-systems.
Procedure:
2. - Puma: Screw the pump onto pump support in accordance with Chapter 14.3.1.
- Cobra: Place the pump onto the frame in the cabinet (product outlet to front).
- EvoMotion: Screw the pump onto pump support in accordance with Chapter 14.3.3.
3. Screw the orange potential equalization line (see Chapter 5.1) onto pump's grounding
connection. (Grounding connection see pump's operating manual.)
- Cobra: Pull potential equalization line out of the left tube on the rear panel and use
this cable.
4. - Puma / EvoMotion: Mount suction hose on pump inlet.
- Cobra: Mount hopper and return tube.
5. Pump's air supply: Connect air hose
compressed air inlet. (Compressed air inlet see Chapter 5.6.2.)
6. Dismount the VM 5020W control unit in accordance with Chapter 10.5.
7. Puma / Cobra:
a. Unscrew threaded plug G1/4" (a) at the air inlet.
b. Screw in the Screw-in fi tting 6-1/4 (b) (Order No. 9992742).
c. With air hose
6 mm; 0.24 inch (Order No. 9982079): Connect connection (b) with
compressed air input for the air motor reversing valve. (Compressed air inlet for
reversing valve see Chapter 5.6.2.)
8. Cobra:
Mount inside the cabinet on the RH side wall in accordance with Chapter 14.3.2:
- Pos. 15: Fitting-DF-MM-G3/8-G1/4-530 bar-SSt – Order No. 2364802
- Pos. 16: Hexagon nut, 0.5 d – Order No. 9910109
- Pos. 17: Fitting-RF-FM-G1/4-1/4NPSM-530 bar-SSt – Order No. 2332619
- Pos. 14: HPP hose DN10-PN530 FEP W-G 0.73 m – Order No. 2332865
ORDER NUMBER DOC 2366600
10 mm; 0.39 inch (see Chapter 5.1) to pump's
a
a
b
b
B_05952
46
Advertisement
Table of Contents
