Table of Contents
Advertisement
VERSION 01/2018
5
DESCRIPTION
5.1
COMPONENTS
Designation
A Suspension hook
B Shaping air regulator
C Clamping nut
D Trigger
E Trigger locking device
F Air connection
G Fluid inlet
H Union nut with nozzle protection
I
Nozzle / Air cap
J Spray gun housing
K Filter housing
L Handle tube
5.2
MODE OF OPERATION
If the trigger (D) is operated when the trigger locking device (E) is released, then the air
valve opens first. Atomizing air flows through the air connection (F) to the air cap (I). The
product valve opens first if approx. 1/2 of the trigger's path is covered. The quantity of air
for the atomization of the spray jet is preset via the external air automatic controller. The
spray pattern can be adjusted using the shaping air regulator (B).
5.3
PROTECTIVE AND MONITORING EQUIPMENT
The spray gun is secured with the locking device (E) (the locking device turned in the
spraying direction and fastened in the groove). The nozzle holder (H) has an anti-contact
guard.
5.4
INCLUDED ITEMS
This AirCoat manual gun is available in three different versions. The choice of nozzle
depends on the application, therefore this component is not included in the standard
scope of delivery. A selection guide for spray gun accessories can be found in Chapter 13.
5.4.1 VERSION FOR APPLICATION UP TO 25 MPA; 250 BAR; 3,625 PSI
Order no. Designation
1
394012
1
2302513
1
2302514
Please always order the nozzle separately.
5.4.2 STANDARD EQUIPMENT
Order no.
1
394891
1
394820
1
see Chapter
1
394335
For special versions the delivery note applies.
ORDER NUMBER DOC 394821
GM 4100AC 25 MPa; NPSM1/4" product connection
GM 4100AC 25 MPa with air cap low-viscosity, red
GM 4100AC 25 MPa with high-viscosity air cap, blue
Designation
CE Declaration of Conformity
Operating manual, in German
1.3
Operating manual in local language
Spring cap 16 MPa; 160 bar; 2320 psi
A
J
I
H
L
B_02255
B
C
E
D
F
K
G
17
Advertisement
Table of Contents
