Table of Contents
Advertisement
VERSION 02/2018
OPERATING MANUAL
5.2
MODE OF OPERATION
The AquaCoat spray system is designed for processing non-ignitable liquids (water lacquers)
in accordance with the air spraying method.
The spray product is regulated via the trigger on the gun (4) and the VM 5020W (3) control unit.
It is drawn in with a product pressure generator (11) via a suction system (13), electrostatically
charged in the sealed off inner chamber of the AquaCoat cabinet (1), and sprayed in the
nozzle of the spray gun with the help of atomizing air.
The product pressure generator and spray gun are connected by the shielded product hose.
5.3
PROTECTIVE AND MONITORING EQUIPMENT
WARNING
Protective and monitoring equipment!
Risk of injury and damage to the device.
Protective and monitoring equipment must not be removed, modified or rendered
unusable.
Regularly check for perfect functioning.
If defects are detected on protective and monitoring equipment, the system must
not be operated until these defects are remedied.
The following elements are provided for system safety:
Safety element
Grounding switch (30)
Electrical door switch (17)
Pneumatic door switch (18)
Leakage resistance (32)
Door lock
Grounding band (16) in the
cabinet door.
Door lock
Only open or close the cabinet door (2) when the
control unit (3) is switched off.
One second after the control unit (3) has been
switched off, the system is grounded and the door
lock opened.
ORDER NUMBER DOC 2366717
Function
Grounding the potential equalization lines and pump
support.
The grounding switch is closed with an open cabinet
door (potential equalization lines are grounded).
Reduces the high voltage in a controlled manner.
Cabinet door can not be opened when the control unit
is switched on.
The grounding band is grounded over the pneumatic
door switch with a closed cabinet door.
0
Power
1
1 s
B_05871
24
Advertisement
Table of Contents
