General Information On Mode Of Operation; Functioning - WAGNER GA 5000EAC Operating Manual

Operating manual GA 5000EAC Electrostatic Automatic Spray Gun (AirCoat)
5 Description
Connections on the rear side:
5
4
B_05742
3
1 Atomizing air connection (D10/blue)
2 Product connection
3 Control air connection (D6/red)
5.2 GENERAL INFORMATION ON MODE OF OPERATION
Note:
Operation of the spray gun in conjunction with the EPG 5000 control unit is described in this
operating manual.
– The high voltage for the GA 5000EAC spray gun is activated directly on the EPG 5000
control unit or by a signal from the superordinate controller.
– The high voltage for the spray gun can be set via the voltage regulator on the EPG 5000
and can be adjusted to the paint or to the spraying object.
Securing the gun:
1. Switch off the mains at the EPG 5000.
2. Switch off the air supply at the EPG 5000.
3. Relieve the pressure of the spray gun and system.
5.2.1 Functioning
GA 5000EACIC:
M
AA / SA
CA
B_06007
Pneumatic diagram
SA Shaping air
AA Atomizing air
CA Control air
22
1
2
4
5
N
SA
AA
M
N
Gun cable connection
Shaping air connection (D8/green)
Material
Nozzle
Order number 2360922 | Edition 09/2022