Description; Components; Mode Of Operation; Protective And Monitoring Equipment - WAGNER GM 4700AC Original Operating Manual

VERSION 06/2018
5

DESCRIPTION

5.1

COMPONENTS

Designation
A Suspension hook
B Shaping air regulator
C Spring cap
D Trigger
E Trigger locking device
F Air connection
G Fluid inlet
H Union nut with nozzle protection
I Nozzle / Air cap
J Gun housing
K Turning handle with filter housing
5.2

MODE OF OPERATION

If the trigger (D) is operated when the trigger locking device (E) is released, then the air
valve opens first. Atomizing air flows through the air connection (F) to the air cap (I). The
product valve opens first if approx. 1/2 of the trigger's path is covered. The quantity of air
for the atomization of the spray jet is preset via the external air automatic controller. The
spray pattern can be adjusted using the shaping air regulator (B).
5.3

PROTECTIVE AND MONITORING EQUIPMENT

The spray gun is secured with the locking device (E) (the locking device turned in the spraying
direction and fastened in the groove). The nozzle holder (H) has an anti-contact guard.
5.4

INCLUDED ITEMS

This AirCoat manual gun is available in two different versions. The choice of nozzle depends
on the application, therefore this component is not included in the standard scope of
delivery. A selection guide for spray gun accessories can be found in Chapter 13.

5.4.1 VERSION FOR APPLICATION UP TO 25 MPA; 250 BAR; 3625 PSI

Order no. Designation
1 2313585
1 2315700
Please always order the nozzle separately.

5.4.2 STANDARD EQUIPMENT

Order no.
1 2316429
1 2311729
1 see Chapter
1 394335
For special versions the delivery note applies.
ORDER NUMBER DOC2311730
GM 4700AC 25 MPa, NPSM1/4" product connection
GM 4700AC-H 35 MPa, NPSM1/4" product connection
(H = for processing heated product)
Designation
CE Declaration of Conformity
Operating manual, in German
1.3 Operating manual in local language
Spring cap 16 MPa; 160 bar; 2320 psi
A
J
I
H
K
P_02379
B
C
E
D
F
G
17