Table of Contents
Advertisement
EDITION 02/2016
OPERATING MANUAL
5.6.2.2
COBRA 40-10 DOUBLE DIAPHRAGM PUMP
The pump is equipped with a special AquaCoat compressed air connection (see below).
All other relevant information can be found in the Cobra operating manual (Order No., see Chapter 1.3.1).
AquaCoat compressed air connection for Cobra
The AquaCoat control unit controls the pressure air
("Pomp pressure" regulator, see Chapter 5.6.1.1).
1 Ball valve
2 Compressed air inlet
3 Safety valve
4 Compressed air input for the air motor reversing
valve (mains pressure)
Positions of the ball valve
A Open: Working position
B Closed: The air motor may still be under pressure.
C Vent: Pull the ring on the safety valve to vent.
Operating pressure in the air motor is vented
(control air pressure is still present).
ORDER NUMBER DOC 2366600
B
1
3
2
4
C
B_05888
37
Advertisement
Table of Contents
